01
Suitable for businesses with exposed outdoor areas, the Aurora umbrella is lightweight and strong due to its fixed arm stabiliser bars.
Our Aurora Cantilever umbrella will sure be a hit for customers wanting all the functions of a cantilever umbrella but are limited on space! Contact us for pricing & printing options.
*Capital Cities Only
| 3.5m Octagonal | 2.8m Square | |
| Installed Wind Rating (km/h)* | 50 | 50 |
| Freestanding base rating (km/h)** | 30 | 30 |
*Note 1: Wind rating applies when umbrella installed in accordance with manufacturer instructions.
**Note 2: Wind rating is a guide based on minimum 880 x 880mm square base, weighing at least 240kg.
Wind ratings are a guide only. Umbrellas should always be closed in anticipation of strong winds and storms and should never be left open unattended. The warranty does not cover wind damage.
Natural
Slate
Smoked Tweed
White
Natural
Linen
Tan
Yellow
Pumpkin
Orange
Salmon
Red
Vermillion
Burgundy
Chestnut
Jade
Pistachio
Khaki
Forest Green
Teal
Turquoise
Light Blue
Sapphire
Lilly
Steel Blue
Pacific Blue
Sailors Navy
Chocolate
Charcoal Grey
Smoked Tweed
Slate
Cadet Grey
Pearl
Carbon
Black
Red Stripe
Orange Stripe
Yellow Stripe
Teal Stripe
Turquoise Stripe
Blue Stripe
Navy Stripe
Black Stripe
We have three options for installing the Aurora umbrella. You can simply purchase a cross base and black concrete pavers that can be positioned anywhere in your garden, or a “semi-permanent” method that provides the most safe and secure operation. Advantages of a semi-permanent installation include:
The spigot (pictured) is included with every side-post umbrella and can be bolted directly onto a concrete slab or decking. Additional installation accessories provide the option of making the spigot removable.
This non permanent option is perfect for areas where you would like to move the umbrella to different locations around the garden or if you live in a rental property.
Designed for use with the Aurora Cantilever Umbrella Cross Base, these pavers are made from moulded concrete and come in a set of 4. Each concrete block weighs 22kg and measures 500mm x 500mm.
Our base plate is suited for areas with existing concrete or decking. Decking installations need to have extra support installed to the joists and for concrete the base plate can be bolted down with a minimum concrete thickness to be 100mm.
The inground sleeve is to be used for garden beds, lawn or any other soft surface or a paved area with sand/aggregate under the pavers. The hole will need to be a minimum of 40cm wide and 70cm deep and belled out at the bottom. Once the concrete is set approx 2-3 days (depending on weather conditions) you can install the umbrella to the sleeve.
The Barrel extension is used to raise a cantilever umbrella out of dirt, sand or tan bark so it doesn’t cause any damage to the rotating mechanism or just to give some extra height to the umbrella if needed. It is 300mm high and 215mm in diameter, and is black powder coated steel.
The Barrel extension is designed to be bolted to an in-ground sleeve or base plate.
The sleek aluminium cover hides 12 concrete pavers (measuring 400mm x 400mm).This non permanent option is perfect for areas where you would like to move the umbrella to different locations around the garden or if you live in a rental property.
The wheel set is optional, so you can use this impressive base without them. This type of base is suitable for light to moderate winds only, (depending on umbrella size).
Please note the pavers are not included.
The Eclipse® cantilever umbrella has the option of attaching uniquely designed canopy stabiliser bars. These stabiliser arms will greatly increase the umbrellas stability on windy days. The stabiliser bars screws into a mounting block already installed in the front channel of the umbrella mast. Each stabiliser arm then attaches to the end of the umbrella arms to the left and right. The stabiliser bars are designed for an environment where the umbrella needs to be up for longer periods of time in windy conditions
Although we have designed our cantilever umbrellas to last and have manufactured the canopies using the highest quality outdoor fabrics, we still recommend using a cover-bag to protect your umbrella through the winter months. The cover-bag helps to keep the canopy clean and free from bird-droppings and other unwanted nasties. It will prolong the life of your umbrella and keep it looking its best for many years to come.
Our rechargeable LED lights comes with matching clips to attach the light to the canopy frame on any location on the arms of the umbrella. You will need to plug in and charge the batteries before use and should last approx 6 hours.
Made with a magnetised base the light can be placed on any metal surface, umbrella canopy, table top or even floated in a swimming pool. Ideal for indoor or outdoor use it has has an 8-10 hour battery life, and 24 different colour options. The Etna light comes complete with an induction charger, electrical adapter, infrared remote control, magnet and storage bag.
