Cafe series flat base plate

Black powder-coated plate designed for use with sandbags, pegs or can be bolted into concrete or decking. The pipe has double-locking screws to secure the umbrella.

Base plate 40mm

To suit any umbrella post up to 40mm in diameter:
Weight = 14kg
500mm x 500mm base

Base plate 50mm

To suit any umbrella post up to 50mm in diameter:
Weight = 18kg
600mm x 600mm base

Cafe series 35kg flat base plate with wheels

35kg black powder-coated plate with wheels for easy maneuverability. The pipe has double-locking screws to secure the umbrella.

35kg base plate with wheels 40mm

To suit any umbrella post up to 40mm in diameter:
600 x 600mm

35kg base plate with wheels 50mm

To suit any umbrella post up to 50mm in diameter:
600 x 600mm

Grey Concrete Base

Concrete has been injected into moulded plastic to create this sleek light grey umbrella base. Available in 40mm and 50mm post.

Grey Concrete Base 40mm

To suit any umbrella post up to 40mm in diameter.

Dimensions: 56cm wide, 30kg weight, 33cm from base to top of spigot, 7cm high base.

Grey Concrete Base 50mm

To suit any umbrella post up to 50mm in diameter.

Dimensions: 66cm wide, 45kg weight, 33cm from base to top of spigot, 7cm high base.

Aurora cross base with pavers

This non permanent option is perfect for areas where you would like to move the umbrella to different locations around the garden or if you live in a rental property. The pavers have been specially designed for use with the Aurora Cantilever Umbrella Cross Base, these pavers are made from moulded concrete and come in a set of 4. Each concrete block weighs 22kg and measures 500mm x 500mm.

880 Heavy Duty Base – wheelset optional extra

The sleek aluminium cover hides 12 concrete pavers (measuring 400mm x 400mm).This non-permanent option is perfect for areas where you would like to move the umbrella to different locations around the garden or if you live in a rental property.

The wheelset is optional, so you can use this impressive base without them. This type of base is suitable for light to moderate winds only, (depending on umbrella size).

Please note the pavers are not included.

Eclipse® & Aurora Cantilever Inground Sleeve

The inground sleeve is to be used for garden beds, lawn or any other soft surface or a paved area with sand/aggregate under the pavers. The hole will need to be a minimum of 40cm wide and 70cm deep and belled out at the bottom, once the concrete is set approx 2-3 days (depending on weather conditions) you can install the umbrella to the sleeve.

Eclipse® & Aurora Cantilever Base Plate

Our base plate is suited for areas with existing concrete or decking. Decking installations need to have extra support installed to the joists and for concrete the base plate can be bolted down with a minimum concrete thickness to be 100mm.

Centre Post inground sleeve

The inground sleeve can maximise your space and minimise the hassle! Our specially designed inground fitting can be installed permanently in grass, concrete, paving or decking. It features a double locking mechanism to secure the umbrella, the inground sleeve has a stainless steel closing lid that hides it away when the umbrella is removed.

The adapter comes in either a 40mm or 50mm spigot.

Download our Inground Sleeve Installation instructions here.

Center Post Base Plate and Spigot

200mm Round Plate with a Stainless Steel 316 matt finish, which can be mounted to concrete or decking.

Available with a 40mm or 50mm spigot, with a Stainless Steel 316 shiny finish.

To suit any center post umbrella with a 40mm or 50mm diameter.

Paraflex post inground sleeve (inc spigot)

This discreet inground sleeve can be used in garden beds, lawn or paved area with sand/aggregate under the pavers. The hole will need to have a minimum of 40cm wide and 70cm deep and belled out at the bottom. Allow the concrete to set which can take 2-3 days depending on the weather conditions.

Spectra inground sleeve

The inground sleeve is to be used for garden beds, lawn or any other soft surface or a paved area with sand/aggregate under the pavers. The hole will need to be a minimum of 40cm wide and 70cm deep and belled out at the bottom. Once the concrete is set approx 2-3 days (depending on weather conditions) you can install the umbrella to the sleeve.

Paraflex spigot

The spigot can be bolted down directly to can existing surface like concrete or decking. If bolting onto timber decking, extra support is need under the deck to help support the umbrella, this can be achieved by adding a timber block “nog” to the joists.

Aurora and Eclipse® Protective Covers

Although we have designed our Cantilever umbrellas to last and have manufactured the canopies using the highest quality outdoor fabrics, we still recommend using a cover-bag to protect your umbrella through the winter months.

The cover bag includes a built in rod for ease of use, so you won’t need to climb onto a ladder to secure the cover bag in place.

Colour matched to your umbrella in our standard colours.

We no longer stock the Sola Shademaker range of cantilever umbrellas and accessories but don’t worry, this protective cover will cover your Shademaker umbrella perfectly!

Cafe series protective covers

  • Small (to suit 2m SQ & 2.8m OCT)
  • Large (to suit 3m SQ & 4.2m OCT)

Our cafe umbrellas have been built to last using the highest quality outdoor fabrics, we still recommend using a cover-bag to protect your umbrella through the winter months or when not in use.

Made from Polyester canvas, and available in black only.

Nova heavy duty protective covers

  • Large (to suit 3m SQ, 4m SQ & 5m SQ)
  • Extra Large (to suit 5m OCT only)

These protective covers will protect your umbrella from the elements if you plan on keeping your Nova umbrella closed for long periods of time or storing it away. Protecting you umbrella from rain, dust and bird droppings is crucial to prolong the life of the umbrella frame and canopy.

Paraflex protective cover

With a new design, this simple but effective protective cover can be used when the canopy frame is still attached to the arm of the umbrella, making this perfect to place over the umbrella to protect it overnight.

No need to get the ladder to place the cover over the umbrella, it comes with a fiberglass rod for easy installment.

Colour matched to suit your umbrella, and made from heavy duty acrylic fabric.

Monaco outdoor patio protective covers

One size cover fits all Monaco umbrellas. A cover bag will protect your umbrella when it is not in use, and during the winter months. A smart investment to keep your Monaco umbrella safe from unwanted nasties.

Colour matched to suit your umbrella and made from heavy-duty acrylic fabric.

Monterey Auto Tilt umbrella protective covers

Our auto-tilt umbrellas have been built to last using the highest quality outdoor fabrics, though we still recommend using a cover-bag to protect your umbrella through the winter months or when not in use.

Colour matched to suit your umbrella, and made from heavy duty acrylic fabric.

Etna light on black Spectra umbrella

Etna LED light with remote

Made with a magnetised base the light can be placed on any metal surface, umbrella canopy, table top or even floated in a swimming pool. Ideal for indoor or outdoor use it has has an 8-10 hour battery life, and 24 different colour options. The Etna light comes complete with an induction charger, electrical adapter, infrared remote control, magnet and storage bag.

For more information, visit our Blog here.

LED lights

Our rechargeable LED lights comes with matching clips to attach the light to the canopy frame on any location on the arms of the umbrella. You will need to plug in and charge the batteries before use and should last approx 6 hours.

  • Simple one-button function
  • When on 100% power each light offers 400LM
  • 3 operational modes: 1) 100% lighting (2) 50% energy saving mode (3) Flash alarm
  • Strong magnet built into one end of the light, to allow hanging from metal objects

Stabiliser Bars

Our cantilever umbrellas have a uniquely designed fixed arm stabiliser bars. These stabiliser arms will greatly increase the umbrellas stability on windy days. The stabiliser bars screws into a mounting block already installed in the groove of the umbrella mast. Each stabiliser arm then attaches to the end of the umbrella arms to the left and right. The stabiliser bars are designed for an environment where the umbrella needs to be up for longer periods of time and windy conditions.

Only available for the Eclipse® and Aurora Cantilever umbrellas.

Sandbags (set of 2) supplied empty for DIY filling

Our sandbags are made from heavy duty PVC with a webbing handle. You can connect the two rectangular weights together with a velcro strap to prevent movement or removal when in use. Available only in black PVC.

Approx weight when filled with sand 15-16kg each bag