Updated Eclipse Opt

01

Gallery

Eclipse® Commercial Cantilever Umbrella Image Gallery

Eclipse® outdoor umbrellas are heavy-duty and equipped with massive canopies, making them great assets to larger outdoor venues.

Specifications

Eclipse V
  • Wind resistant cantilever umbrella with a giant canopy for maximum shade protection
  • Heavy duty design (approx. 45kg weight) maximises strength and wind resistance while still maintaining a contemporary design aesthetic
  • Well suited to exposed areas such as large pools, high decks, coastal locations, etc
  • Easy action winding handle to open and close the umbrella
  • Unique integrated rotational handle and lock – 360 degree rotation
  • Large sizes provide maximum coverage
  • Industry leading 5 year warranty on frame & mechanics and 5 year warranty against fading of canvas
  • 100% Solution Dyed Acrylic Canvas – Recacril by Recasens – the best outdoor fabric on the market
Eclipse Infographic
Umbrella 360 Rotation
astr m
3m Square
Eclipse Oct
4m Octagonal

Contact us for price and printing options

*Capital Cities Only

3m Square 4m Octagonal 3m x 4m Rectangular
Installed Wind Rating (km/h)refer Note 1 below 65 65 50
Freestanding base rating (km/h)refer Note 2 below 30 30

Note 1: Wind rating applies when umbrella installed in accordance with manufacturer instructions.

Note 2: Wind rating is a guide based on minimum 880 x 880mm square base, weighing at least 240kg.

Wind ratings are a guide only. Umbrellas should always be closed in anticipation of strong winds and storms and should never be left open unattended. The warranty does not cover wind damage.

Standard Colours (Premium Solution Dyed Acrylic Canvas)
Natural

Natural

Slate

Slate

SmokedTweed

Smoked Tweed

Non-Standard Colours (Premium Solution Dyed Acrylic Canvas)
Surcharge and additional lead time apply
White

White

Pearl

Pearl

Linen

Linen

tan

Tan

yellow

Yellow

Pumpkin

Pumpkin

orange

Orange

salmon

Salmon

red

Red

Vermillion

Vermillion

burgundy

Burgundy

Chestnut

Chestnut

Jade

Jade

pistachio

Pistachio

Khaki

Khaki

forestgreen

Forest Green

Teal

Teal

turquoise

Turquoise

LightBlue

Light Blue

sapphire

Sapphire

Lilly

Lilly

steelblue

Steel Blue

pacificblue

Pacific Blue

sailorsnavy

Sailors Navy

chocolate

Chocolate

cadet grey

Cadet Grey

CharcoalGrey

Charcoal Grey

Carbon

Carbon

black

Black

Non-Standard Striped Colours (Premium Solution Dyed Acrylic Canvas)
Surcharge and additional lead time apply
redstripe

Red Stripe

orangestripe

Orange Stripe

yellowstripe

Yellow Stripe

tealstripe

Teal Stripe

turquoisestripe

Turquoise Stripe

bluestripe

Blue Stripe

navystripe

Navy Stripe

BlackStripe

Black Stripe

Our side-post umbrellas can be easily installed using a “semi-permanent” method that provides the most safe and secure operation.

Eclipse Aurora Stainless Steel spigot

Spigot (Included)

The spigot (pictured) is included with every side-post umbrella and can be bolted directly onto a concrete slab or decking. Additional installation accessories provide the option of making the spigot removable.

Base plate Eclipse Aurora

Base plate

Our base plate is suited for areas with existing concrete or decking. Decking installations need to have extra support installed to the joists and for concrete the base plate can be bolted down with a minimum concrete thickness to be 100mm.

Inground Sleeve

Inground Sleeve

The inground sleeve is to be used for garden beds, lawn or any other soft surface or a paved area with sand/aggregate under the pavers. The hole will need to be a minimum of 40cm wide and 70cm deep and belled out at the bottom, once the concrete is set approx 2-3 days (depending on weather conditions) you can install the umbrella to the sleeve.

Heavy Duty Base With Optional Wheel Set

“880” Heavy Duty Base (with optional wheel set)

The sleek aluminium cover hides 12 concrete pavers (measuring 400mm x 400mm). This non-permanent option is perfect for areas where you would like to move the umbrella to different locations around the garden or if you live in a rental property.

The wheelset is optional, so you can use this impressive base without them. This type of base is suitable for light to moderate winds only, (depending on umbrella size).

Please note the pavers are not included. This base should not be used for the 3m x 4m Eclipse rectangle, this size requires installation only.

Eclipse Barrel cropped

Barrel extension

The Barrel extension is used to raise a cantilever umbrella out of dirt, sand or tan bark so it doesn’t cause any damage to the rotating mechanism or just to give some extra height to the umbrella if needed. It is 300mm high and 215mm in diameter, and is black powder coated steel.

The Barrel extension is designed to be bolted to an in-ground sleeve or base plate.

SCREEN PRINTING

  • Best suited to logos that feature 1-5 spot colours
  • Printed on umbrella canvas – many colours to choose from but they must be selected from our available range (closest match to corporate colour)
  • Logo required as a vector file
  • Colours specified as Pantone/PMS codes for colour-matching of print
Eclipse 3m Sq Peters Drumstick at MSAC
Stabiliser Bars

Stabiliser bars

The Eclipse® cantilever umbrella has the option of attaching uniquely designed canopy stabiliser bars. These stabiliser arms will greatly increase the umbrellas stability on windy days. The stabiliser bars screws into a mounting block already installed in the front channel of the umbrella mast. Each stabiliser arm then attaches to the end of the umbrella arms to the left and right. The stabiliser bars are designed for an environment where the umbrella needs to be up for longer periods of time in windy conditions

Eclipse Aurora Protective Coverbag

Protective covers

Although we have designed our cantilever umbrellas to last and have manufactured the canopies using the highest quality outdoor fabrics, we still recommend using a cover-bag to protect your umbrella through the winter months. The cover-bag helps to keep the canopy clean and free from bird-droppings and other unwanted nasties. It will prolong the life of your umbrella and keep it looking its best for many years to come.

LED Light

LED lights

Our rechargeable LED lights comes with matching clips to attach the light to the canopy frame on any location on the arms of the umbrella. You will need to plug in and charge the batteries before use and should last approx 6 hours.

  • Simple one-button function
  • When on 100% power each light offers 400LM
  • 2-year battery life
  • 3 operational modes: 1) 100% lighting (2) 50% energy saving mode (3) Flash alarm
  • Strong magnet built into one end of the light, to allow hanging from metal objects
Etna light on dining table resized

Etna LED light with remote

Made with a magnetised base the light can be placed on any metal surface, umbrella canopy, table top or even floated in a swimming pool. Ideal for indoor or outdoor use it has has an 8-10 hour battery life, and 24 different colour options. The Etna light comes complete with an induction charger, electrical adapter, infrared remote control, magnet and storage bag.