| |
|
|
In-ground sleeve & adaptor:
- Maximise your space and minimise the hassle!
- Using our specially designed "bazooka" in-ground fitting, market umbrellas can be installed permanently in grass, concrete, paving or decking.
- Featuring a double locking mechanism to secure the umbrella, the in-ground sleeve has a closing lid that hides it away when the umbrella is removed.
- Two piece design:
- 300mm sleeve installed in-ground, features spring loaded stainless steel lid
- Umbrella adaptor goes inside sleeve while maintaining original height of umbrella
- Adaptor available to suit 40mm and 50mm umbrella posts
- Download our Cafe Style Market Umbrella Installation Guide
|
 |
Protective covers:
- Specially designed weatherproof protective covers
- Long aluminium rods/handles to assist with getting the cover on and off
- Zip closing
- Water repellant and UV-resistant Polyester Canvas material
- Available in BLACK
|
 |
Base plate / Base stand:
- Rust treated and Powder coated BLACK
- Designed for use with sandbags, pegs or can be screwed into concrete or decking
- Double locking screw mechanism keeps umbrella securely in place
- Available in two sizes:
- 500mm x 500mm with spigot to suit umbrella up to 40mm diameter post, weight = 14kg
- 600mm x 600mm with spigot to suit umbrella up to 50mm diameter post, weight = 18kg
|
|
Sandbags (umbrella weights):
- Two separate rectangular shaped sandbags
- Sandbags connect together with velcro straps to prevent movement/removal when in use
- Weight = approx. 18kg when filled
- Cover majority of base surface for even weight distribution
|
|
Protective covers (for cantilever umbrellas):
- Premium Acrylic Canvas
- Water repellant and UV resistant
- Avaialble in Tan, Slate, Black
- Available for Eclipse, Sola and Liberty umbrellas
|
 |
Spigot:
- The spigot is included with every side-post umbrella and can be bolted directly into a concrete slab or decking.
- It can also be used in conjunction with the Base Plate and In-ground fitting accessories below to create a removeable spigot solution.
|
 |
Base plate (for cantilever umbrellas):
- Rust treated and Powder coated BLACK
- Designed for fixing to timber decks or existing concrete slabs/patios
- Diameter = 215mm
- For more information on installing our cantilever umbrellas, consult our Sola & Liberty Umbrella Installation Guide
|
_web.jpg)
|
In-ground fitting (for cantilever umbrellas):
- Galvanised steel
- Designed for mounting in concrete footings (where new concrete is being poured)
- Top plate diameter = 215mm
- Depth = 500mm
- For more information on installing our cantilever umbrellas, consult our Sola & Liberty Umbrella Installation Guide
|
 |
- Hinged Spigot makes erecting the big long umbrella much easier
- The spigot is designed to attach to the top of the plate or inground fitting below
- The spigot can also be bolted directly to an existing concrete slab or deck but in this case the hinge cannot be used
- Plate diameter is 215mm
- Vertical pipe height is 700mm - the umbrella slips over the outside of this pipe and secures in place with a bolt
|
 |
- Base plate for fixing to existing concrete slab or footing using concrete screws
- Can also be fixed to decks if reinforced with suitable "nog" between joists
- Fixing screws can be countersunk for a flush finish
- Galvanised steel
- Diameter of plate is 400mm
|
 |
- In-ground fitting fixed into concrete footing at time of pouring concrete
- Galvanised steel
- Top plate is same diameter as spigot plate (215mm)
- Pipe that goes into the ground is 500mm long
|
|
Heaters:
- Many sizes and heat strengths available
- Professionally connected and installed
|
 |
Side panels / Curtains:
- Fully enclose the umbrella structure with clear side panels / curtains
- Zip-track or hand-rolled options
|
.jpg)
|
Other accessories:
|
|
|
 |
